Pieresearch Manufacturer of Quality Concrete Accessories

YOUR SOLUTION TO REBAR
CAGE ALIGNMENT.

817-265-0980 or 800-342-2409

Quick-Lock™ & Quick-Lock HD™ Pier Wheels, Quick-Lock Pier Boot™ & Quick-Zip Bar Booster™ Pier Bolsters, Centraligner™ Pier Sleds, Hijacker™ Pier Bolsters, Concrete Pier Wheels, Slurry Wall Sleds™

Pieresearch Centraligner™ Pier Sleds

THE PROBLEM:
Pieresearch Centraligner™ Pier SledsRebar cage alignment in drilled shafts, drilled piers, caissons, cast-in-drilled-hole piling and cast-in-place pile.

Without proper alignment, the rebar cage cannot perform the function for which it was designed. Proper positioning helps protect against long-term corrosion of the rebar. Faulty alignment can cause foundation failure, which often leads to issues of contingent liability. Because the rebar cage cannot be inspected or tested after the concrete is placed in the drilled shaft, the cage must be aligned properly the first time.

Often spacers, such as rocks, bricks, or sticks are used in an attempt to properly space the cage within the shaft. Usually these devises fail to stay attached to the cage and tend to gouge the side of the shaft, causing debris to clutter the shaft's floor.
THE SOLUTION:
PIERESEARCH has developed a solution to these cage-positioning problems consisting of two 7,500 psi high-strength grout devices, the Centraligner® Pier Sled and Hijacker® Pier Bolster.

Centraligner® Pier Sled contains a notch for the spiral or circle tie and has four sets of integral, embedded 16 gauge galvanized wires for ease of installation. The sled's shape prevents the cage from hanging on the casing and it doesn't protrude into the interior of the cage so interference with the tremie is not a concern.

These products have been well received by the structural engineering and construction communities. They achieve a result that has long been sought by structural engineers.
To order, call PIERESEARCH for current pricing, give quantity, size and name. PVC coated tie wires are available on special order.
Product Schematic / Line Drawing
Available in the following sizes:
Part No.
2CPS
3CPS
4CPS
5CPS
6CPS
7CPS
8CPS
9CPS
2" Centraligner Pier Sleds ..............25 ea. per bag
3" Centraligner Pier Sleds ..............25 ea. per bag
4" Centraligner Pier Sleds ..............25 ea. per bag
5" Centraligner Pier Sleds ..............10 ea. per bag
6" Centraligner Pier Sleds ..............10 ea. per bag
7" Centraligner Pier Sleds ..............10 ea. per bag
8" Centraligner Pier Sleds ..............10 ea. per bag
9" Centraligner Pier Sleds ..............10 ea. per bag
For further information about this product, recommendations for their use, or a FREE SPEC KIT, contact us at 817-265-0980 or 800-342-2409.

IMPORTANT INFORMATION

Centraligner™ Pier Sleds Brochure
Centralginer™ Pier Sleds Spec Sheet
Centraligner™ Pier Sleds Installation Instructions
Centraligner™ Pier Sleds Quantity Table
Detail Placement Sheet
MSDS Sheet
Spec Kit

Use Our Convenient
Product Quantity Calculator

Pieresearch Cage Quantity Calculator
Use our online Product Quantity Calculator to help you determine how many sleds, bolsters or wheels you will need for your project.
Pieresearch Accepts Credit Cards
Pieresearch accepts Visa, Master Card and Discover Card
MANUFACTURER'S REPRESENTATIVE
The Stan Agee Company

817-994-1050 or 800-342-2409 
FAX 817-275-2335
FACTORY
PIERESEARCH

501 E. Main Street
Arlington, TX 76010
817-265-0980 or 800-342-2409
FAX 817-275-2335
Pieresearch Products are amde in the U.S.A.